| The physical properties of fiber reinforced composite materials depend on the ability of the polymer matrix both to transmit stresses to the fiber reinforcement and to protect the fibers from damage. To promote these characteristics, fibers are treated during manufacture with mixtures of sizing and coupling agents. The optimization of a given coating is complicated by the fact that individual components often perform more than one function. Am experimental technique and a theoretical analysis have been developed which allow evaluation of both the stress transfer capability and the fiber protection performance of a given surface treatment. The analysis should be of particular value in the optimization of commercial fiber treatments. |
| 1 |
17 |
admin |
May 01, 2010 - 00:42 |
|
163.1KB |
PDF |
No Votes, out of 0 Votes. |
| MD5: 10414ab7fb7acb95aea6991d68acc505 · SHA1: 6c63ad0b8e00945fe2bf58b3203922cf3836dd62 |
| 56Kbit Modem: 24s · 256Kbit: 6s · 1Mbit: 2s · 5Mbit: 1s |
Search - Statistics & RSS - Contact Admin - -
PHCDownload 1.1.2 - Copyright (c) 2005 - 2010 - 0.0638 seconds
Home » » Composite Manufacturing » Evaluation of fiber surface treatments in composite materials.pdf